SIL-A Over Current & Earth Fault Relay
The SIL-A is an overcurrent and earth fault protection relay for primary and secondary distribution with auxiliary power supply (110-230Vac/90-300Vdc, 24-48 Vdc or 24-110 Vdc / 48-230Vac). The current measurement is obtained either by standart current transofrmers /1 or /5, or by special Low Power Current Transformers (LPCT). SIL-A Adaptation B wit
SIL-B Feeder Protection Relay
The SIL B is a Relay for Primary Distribution which is able to protect a feeder by means of current and voltage functions. It is normally used with a circuit breaker as cutting element. Monitors differences in voltage magnitudes, phase angles, and frequencies to perform synchronism checks across the circuit breaker. This function can be coordinated
SIL-G Generator Protection Relay
The SIL-G is a relay for the protection of generators which is able to protect a generator by means of current, voltage and frequency functions. It is normally used with a circuit breaker as cutting element.
SIL-D Overcurrent & Directional Earth Fault Protection Relay
SILD, SIL-D, Overcurrent and Directional Earth Fault Protection Protection IED, 3 Phase Overcurrent Protection, Directional three-phase overcurrent protection, ANSI 67, IEC 61850, GOOSE, IEC 101,IEC 103, IEC 104, Modbus, DNP 3.0, 6 Configurable LED
AAR 201 / 301 Dip Switch Over Current Relay
AAR-301 is an over current protection relay which is manufactured according to IEC-255, designed as a transfomer and line protection relay for MV & HV Systems. AAR-301 is a microprocessor based device that has multifunctional hardware to meet the requirements of the market.
We really care about your suggestions.
You can freely post your opinions and complaints if any :) about our company, our products and services.
Our quality department will detailly evaluate your posts and will inform you as soon as possible.
Many thanks for your kind interest.