(0)

Solid Dielectric Load Break Switch

Solid Dielectric Load Break Switch-Solid Dielectric Load Break Switch

Sipariş No : Solid Dielectric Load Break Switch

Solid Dielectric Load Break Switch(LBS) was designed to improve the disadvantages in SF6 gas insulated Load Break Switch and to enhance Electric Power Distribution Line. Solid dielectric LBS encapsulated with cycloaliphatic epoxy material, is designed to become explosion-free product unlike SF6 gas insulated LBS with low gas pressure condition.

Solid Dielectric Load Break Switch


Solid Dielectric Load Break Switch(LBS) was designed to improve the disadvantages in SF6 gas insulated Load Break Switch and to enhance Electric Power Distribution Line. Solid dielectric LBS encapsulated with cycloaliphatic epoxy material, is designed to become explosion-free product unlike SF6 gas insulated LBS with low gas pressure condition. Solid dielectric LBS is not only the protection of the environment but also overcomes its fatal disadvantage. Solid dielectric LBS uses Vacuum Interrupter and enhanced its switching capability, as well as, eliminates any explosion possibility by adopting solid dielectric method. In addition, it provides Maintenance free from periodic gas leak and gas refilling test.
 
Item Rating     Item Rating
Rated Voltage (kV) 15/27     Basic Impulse Withstand Voltage (kV 1.2x50) 110/150/170
Rated Current (A) 630     Control Cubicle Operation Voltage AC 220V 1 Phase
Frequency 50/60     Control Cubicle Control Power DC 24V
Short circuit interrupting Current (kA) 12.5(R.M.S.)     Control Cubicle Permeable Voltage 85-110%
Making Current Capacity (kA) 32.5(Peak)     Control Cubicle Power Frequency Withstand Voltage 2kV 1 min.
Opening Time (Cycle) ≤3.0(0.05sec)     Control Cubicle Basic Impulse Withstand Voltage (kV 1.2x50) 6kV, 3kA
Closing Time (Cycle) ≤5(0.1sec)     Weight (kg) Tank 95
Power Frequency  Withstand Voltage (kV) Dry:50/60/70
Wet:45/50/60
    Weight (kg) Control Cubicle 65/80
Communication Port RS232,RS485/422, RJ45        
 
Key Characteristics
 
  • Solid insulated Vacuum Interrupting type of Environmental friendly product
  • Motor Spring Charged Mechanism
  • Source and Load side Voltage, Current metering (3 CTs are embedded in side of Source side - not load side)
  • Distribution Automation operation available
  • Environmental friendly product without using Green house effect gas
  • The world first vertical phase arrangement Solid Insulated structure
  • Compact, Light weight and permanent life
  • No gas leakage trouble
  • Eliminating of tank explosion from Inner Arc
  • Constant quality keeping by Mold production
  • Source and load side power monitoring by RVD and Resistor
  • RTU Built-In/Separable type, Digital control
  • International Standard: IEC 62271-103 Fully Complied

Photos

Files

Save ×
Save ×

Write To Us

Dear Customer,

We really care about your suggestions.

You can freely post your opinions and complaints if any :) about our company, our products and services.

Our quality department will detailly evaluate your posts and will inform you as soon as possible.

Many thanks for your kind interest.

Best Regards.

RELKO ENERJI


(*)
(*)
(*)
(*)
×

×